Water Play Park Fiberglass Water Tube Slide For Swimming Pool

Established in 2003, Mutong is a comprehensive  amusement equipment enterprise which focus on developing, designing, manufacturing, supplying and installing indoor and outdoor recreation equipments.
After more than 15 years developing, now MUTONG owns production base with area more than 10,000M2.

Our service:
1,Theme Children park overall plan:We provide service for real estate, kindergartens, streets, communities, parks, hotels, tourist resorts, water parks and all kinds of theme parks all over the world, including project designing, equipments producing and installation.
2,Outdoor playground equipments customized service:Parent-child playground, Company League- building playground.
3,Professional customized slides:We offer customized slides with material stainless steel, fiberglass, plastic, PE and wooden.
4,Indoor playground design:Indoor playground overall plan, product sales and installation.
5,Water park equipments:Water park slides, water splash pads, water features, water sprayers including design, sales, manufacture and installation.

Our advantages:
-Factory directly price
-More than 16 years manufacture experience
- CE, ISO9001:2008,ISO14001,OHSAS18001 standards
- 56+ Countries
- Dedicated Product R&D center

Our product series: Water park equipments; outdoor playground equipments; indoor plaground equipments; fitness equipments; wooden playground equipments etc.

Our certificates:

Water Softener Troubleshooting Too much Water in Brine Tank
https://thewaterfilterestore.com/ or https://www.waterstoresgroup.com/store…
FREE Shipping Canada and Discount Pricing at https://thewaterfilterestore.com/colle…
Share this video https://youtu.be/Zikmilf_Tu0
Get a FREE REPORT on the 10 Biggest Mistakes made when purchasing water treatment equipment and how you can avoid them.

https://thewaterstoremidland.com

One of the most common symptoms of a poorly functioning water softener is when the water level in the brine tank is too high. These are some of the potential causes, we’ll start with the most common first:
1. The brine line has become detached from the top of the float – Yes, it does happen, which means that it cannot draw brine, only keep filling the brine tank. To resolve this situation just reattach the brine line.
2. A salt bridge has formed in brine tank – this will stop the water from entering and exiting the brine tank. This can usually be removed with hot water but check out our other video specifically on this topic.
3. The drain line is clogged or frozen which restricts its ability to draw brine, a kink in the drain line will cause the same problem.
4. The drain line flow control is clogged with debris – the control needs to be cleaned out to make sure the water softener will drain quickly enough to draw brine.
5. There is “foreign material” inside of the brine level control valve or float- the valve can be disassembled and cleaned (if there is a valve). I have often seen salt build up at the bottom which impeded its ability to draw brine.
6. There is “foreign material” inside the brine line flow control – the flow control can be cleaned. If you have a lot of debris in the brine tank the dirt can get sucked up into the brine line flow control. The hole just needs to be cleaned.
7. The injector system is clogged – The injector creates a vacuum to draw the brine from the brine tank. If the injector and the screen become clogged it won’t draw the brine out but will keep filling the brine tank. To remedy, you need to remove the injector and screen which can be cleaned by soaking in a descaler like CLR or Iron Out. If you need to clean out the orifice be sure to use a wooden tooth pick so as not to misshape the inside of the injector.
8. The water softener timer is not cycling properly – this problem usually means a new circuit board is needed. This becomes obvious when you try to change the settings and they won’t change or the led display is blank as though the water softener is unplugged.
9. Bad spacer stack or pistons inside the valve – If you remove the brine and drain elbows with the unit in service mode and you see water moving inside the valve after waiting 15 seconds, the spacer stack and pistons need to be replaced.

So start with the first one and if that doesn’t solve the problem work your way through the list.
And that’s it! If you liked some of the information you saw here today please click on the subscribe button and that way you will get updates on the new videos I will be posting over the next few weeks. Or check out our websites at TheWaterStoreMidland.com or TheWaterFilterEstore.com
Discount Pricing and FREE Shipping on water softeners https://thewaterfilterestore.com/search?type=product&q=water+softeners